Pocket PC Dial-up Instructions
Setup
Installation Instructions
Installing the iPassConnect client is simple. The installation file for installing the client software can be found on your company intranet, or on your service
provider’s Web site. Before the installation process, make sure that:
• Microsoft ActiveSync 3.5 or 3.6 is installed on your PC.
• Your PDA cradle is connected to your PC.
You should then dock your PDA, and establish a partnership between the PDA
and PC.
To install iPassConnect on your PDA:
1. Download the iPassConnect installation file from your company intranet or
service provider Web site to your PC.
2. On your PC, double-click the file to begin installation.
3. Proceed through the installation wizard.
4. Review the End User License Agreement. You must accept the Agreement in
order to install the software.
5. Your PC will communicate with your PDA. On the Installing Applications
dialog box, under “Install iPassConnect using the default application install history?”
click Yes.
6. After installing the client on your PC, check your PDA screen to see if
any additional steps need to be taken. Otherwise, the installation process is now complete,
and you will see an iPassConnect icon on your PDA’s Start menu. You are now ready to
connect.
Launching iPassConnect
To launch the iPassConnect client, on the Start menu, tap iPassConnect.
Basic Configuration
Before Connecting
Before connecting for the first time, you should make sure that your user
information has been entered correctly. If you are a dial-up user (modem, ISDN or PHS), you
should also make sure that your dial properties are set and your modem is correctly configured.
Setting your User Information
To set your user name, domain name and password:
1. On the Options menu, tap User Info.
2. Enter your user name and domain (for example, jim@company.com)
3. Enter your password.
4. If you want iPassConnect to store your password information, select Save Password.
5. Tap OK.
Setting the Dial Properties (Dial-Up Users Only)
If you’re a dial-up user (which includes modem, ISDN and PHS), it’s very
important to set your dial properties correctly.
To set your dial properties:
1. On either the Modem, ISDN or PHS tabs, double-tap Dial Properties.
2. Under General, in Dial Prefix, enter any dial prefix you may need, such
as 9 to get an outside line.
3. If you wish to disable Call Waiting, in Disable Call Waiting, select the
characters needed from the drop-down list.
4. In Dial Using, select whether your phone system uses tone or pulse dialing.
5. Under Dialing From Location:
• If this will be the same location as the one you are connecting to, select Same Location.
• Otherwise, select the location from which you are dialing, including country and area code.
Then select an area rule that reflects your local area’s dialing rules (for example, dialing a 1 before the
area code.)
6. The complete dial string, which reflects all of the
dial properties you have set, appears at the
bottom of the dialog box. If this is not correct, fix the properties as
required for correct dialing from your location. If the dial string is correct, tap OK.
Configuring your Modem (Dial-up Users only)
If you’re a dial-up user, you must make sure your modem is configured
correctly.
To configure your modem:
1. On the Options menu, select Settings.
2. Tap the Dialup tab.
3. Under Device Settings, select the modem device from the drop-down list.
4. Tap Configure.
5. On the Port Settings tab, enter your modem’s configuration data, such as
baud rate, data bits, parity, stop bits and flow control. We recommend you leave these
values set to their defaults, or consult your modem’s documentation for details.
6. On the Call Options tab, set any desired call options.
• If you wish to set an interval for the client to cancel a call.
• To disable the wait for a dial tone, deselect Wait for dial tone before
dialing.
• Enter any interval needed to wait for a credit card tone
• Enter any extra dial-string modem commands.
7. Tap OK.
